Setup Menu - Venturer PLV31220S1 Instruction Manual

TIME MENU
1. Press the MENU button. _ _ _
2. Use the • or • button to select TIME, then
press the • button to enter the TIME settings. ,._c-_u_:4_,_o T_MESETU,_ _ :_A_ _L _V
3. Use the • or • button to select the options
(OSD Duration, Sleep Timer, Time Zone, Day
Saving Time or Clock). Adjust them using the
• or • button.
4. Repeat step 3 to adjust other options.
5. To exit the MAIN MENU and return to the normal
screen, press the EXIT or MENU button
repeatedly.
OSD (On Screen
Sleep Timer
Time Zone
Day Saving Time
Clock
Display) Duration : Select the length of time the On screen menu is
displayed : 15 Sec / 30 Sec / 45 Sec / 60 Sec.
: Select the length of time before the unit automatically changes to
Standby mode : Off -> 5 Minutes -> 10 Minutes -> 15 Minutes -> 30
Minutes -> 60 Minutes -> 90 Minutes -> 120 Minutes -> Off.
: Select the time zone from Eastern / Central / Mountain / Pacific / Alaska
/ Hawaii.
: Select On to activate daylight savings time.
: Displays the current time.
SET UP MENU
1. Press the MENU button.
2. Use the • or • button to select SET UP, then _c_u_: _,u_o _'_E SETUP _ A_:_BH_L _v
press the • button to enter the SET UP settings.
3. Use the • or • button to select the options
(OSD Language, Color Mode, PC Set Up,
Closed Caption or Restore Setting). Adjust them
using the • or • button (The screen will change
to your desired setting); or press the • button to
go into the detailed settings.
4. Press the MENU button to return to the previous
menu.
5. Repeat steps 3 and 4 to adjust other options.
6. To exit the MAIN MENU and return to the normal screen, press the EXIT or MENU button
repeatedly.
OSD (On Screen Display) Language : Select On-screen menu language from English /
French / Spanish.
Color Mode : Adjust the three color temperature of the picture. Choose from Normal
(balanced), Warm (red white) or Cool (blue white) modes.
Restore Setting : If you reset the TV to the factory settings, all your present settings on
PICTURE and AUDIO will be erased and replaced by the factory's default
settings.
E - 21