Playback; Track - Venturer PLV31220S1 Instruction Manual

This owner's manual explains the basic instructions of this unit. Some DVDs are
produced to limit operation during playback. For example, many DVDs do not allow
users to skip government warnings, or in some cases previews or other features.
This is not a defect in the unit. Refer to the instruction notes of discs.
" [] " may appear on the screen during operation. A " [] " means that the desired
operation is not permitted by the unit or disc.
PLAYING A DISC
1. Press the STANDBY/ON button to turn the unit on.
2. Press the FUNCTION button to select DVD mode.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3. Press the A PUSH OPEN button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front,
until you hear a "click".
5. Push the disc door gently to close it. It takes a short while for your unit to load the disc. After
loading, for most DVDs, the unit will automatically take you main menu or start playing. If the
unit does not automatically start playing the DVD, press the _ PLAY button.
PLAYING A PICTURE FILE DISC
This unit can play picture files recorded on CD-R and CD-RW discs.
1. Press the A PUSH OPEN button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the
front, until you hear a "click".
3. Push the door gently to close it. The picture files on the disc will be displayed one by one
automatically.
4. Press the • STOP button to go to the folder list.
5. Press the • or • button to highlight a file to play. Press the _ PLAY button to start playback.
Note:
• You can press the In PAUSE button to interrupt playback, and press the _ PLAY button to
resume playback.
• You also can use the GOTO function or use the numbered buttons to enter the image number
to quickly select any image.
• Press the ANGLE button on the remote control to rotate the picture orientation by 90°.
PAUSING PLAYBACK (STILL MODE)
Press the II PAUSE button. To resume normal playback, press the _ PLAY button. Each time
you press the II PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the • STOP button at the location where you want to interrupt playback. To resume playback at
the position where the disc was stopped, press the _ PLAY button.
If you press the • STOP button twice, the unit's memory will be cleared and pressing the
PLAY button will reset the disc to the beginning.
SKIPPING TO A DIFFERENTTRACK
• Press the I._ PREV button to go back to previous chapters/tracks.
• Press the I_IH NEXT button to advance chapters/tracks.
• For an Audio CD, use the number buttons (remote control only) to go directly to that track
number.
E - 25