5
6
Winding
the bobbin
- Place thread and spool holder onto spool pin (1). For smaller
spools
of thread
place spool
holder
with small
side next to
spool. (2)
- Snap thread into thread guide. (3)
- Wind thread clockwise
around bobbin winder tension discs. (4)
- Thread bobbin as illustrated
and place on spindle.
(5)
- Push bobbin to right. (6)
- Hold thread end (7). Step on foot control
pedal. (8)
- Cut thread (9). Press bobbin to left (10) and remove.
Please
Note:
When the bobbin winder spindle
is in "bobbin
winding"
position,
the machine
will not sew and the hand wheel will not turn. To
start sewing,
push the bobbin winder
spindle to the left (sewing
position).
8
J
9
I
10
18