Sewing On Buttons - Singer 2932 Instruction Manual

a
A,,L _
Sewing on buttons
Move the drop feed control to right side to lower the feed
dogs. (1)
Change presser foot to button sewing foot (2). Select zig
zag pattern " } "
Position the work under the foot. Place the button in the
desired position, lower the foot, adjust stitch width to "3"
and sew a few securing stitches. Adjust the stitch width to
"5". Turn the handwheel to check that the needle goes
cleanly into the left and right holes of the button (adjust the
stitch width according to the button), and slowly sew on the
button with about 10 stitches. Adjust the stitch width to "0"
and sew a few securing stitches. (3)
If a shank is required, place a darning needle on top of the
button and sew (4). For buttons with 4 holes, sew through
the front two holes first (3), push work forward and then
sew through the back two holes. (4)
46