Sanyo CLT1554 Owner's Manual page 9

Using the Audio/Video input Jacks
Connecting a VCR or DVD Player
Switch off TV and external equipment before connecting cables. (Cables are not sz_pplied.)
O Connect VCR, DVD Player, or other equipment's Audio Video Output to the TV Audio
Video Input.
For Mnno VCR (Single Audio Jack) connect VCR Audio Output to TV Audio (L) Input.
@ @tional
Connect DVD Player or other cqmpment's S-Video Output to the TV S-Video Input Jack.
Using the S-Video jack overrides the Video jack.
Press POWER to mm on the TV. Tuna on external equipment also.
Press the INPUT key to select VIDEOI or VIDEO2.
Back View of VCR
@
TV AV inputJacks DVDPlayer
What you will need for connections:
AV Cable - 1
OPTIONAL CONNECTION
@ S-Video Cable - 1
@ Audio Cable - 1
Quick Tips
[] Makesure aft cable
connectorsare fully
seatedon jacks.
[] Always matchAV
cablesaccordingto
the colors; RED for
right audio, WHITE for
left audio and YELLOW
for video.
[] A solid Blue screen
with the word
VIDE01or VIDE02,
displayedmeans
that the Videomode
is selected,but
no signal is being
detectedat the
Videojacks. Check
connections,turn on
externalequipment.
Needhelp?
Visitour Website at
www.sanyoctv.€om
or Caii 1-800-877-5032
Using A/V In Jacks: Connecting a VCR or DVD Player