Sanyo CLT1554 Owner's Manual page 10

Using the Remote Control
i_ Ouick Tips
Be sure batteries are
installed correctly.
Point the remote
control toward the
T_ Objects between
the remote control
and the TV may
cause misoperation
of the remote control
function.
The "C" in front of
the number on your
screen indicates a
cable channel
Adjusting the
volume leve2 Flash-
ing Right _ arrow
indicates volume is
increasing and Flash-
ing Left _ arrow
indicates volume is
decreasing.
Need help?
visit our Website at
wwwosanyoctv.€orn
or Call 1-800-877-5032
Point towards TV
POWER
V-GUIDE
-O
Caption Key--See page 13.
@V-Guide Key--See pages 14 -- 15.
Reset Key--Press this key twice to restore
facto W settings. The TV will automatically start
Channel Search and clear all customized settings.
These features will automatically reset:
° Picture Controls: Auto, Game, and Manual:
Color, Tint, Contrast, Brightness and
Sharpness
. Sound Controls: Audio, Bass, Treble, and
Sun'ound
° Channel Controls: Antenna, CH. Search and
CH. Memory
° Set Up Controls: Color Enhancer, Aspect
Ratio, and Backlight
* Caption to OFF
° V-Guide to OFF
° Language to English
° Sleep Timer (if previously set)
° Video to TV (if previously set)
If desired, personal settings can be made
again using the menu options.
Input Key--Press to select the program source to
watch: TV signal or signal from DVD or other equip-
anent you have connected to the AiV jacks.
@Menu Key--Use this key with the A/Y and -/+ keys
to navigate and adjust features of the on-screen menu
system (see pages 11 -- 13).
Channel Scanning (CH A/V) and Volume (VOL
-/+) Keys--Press to scan through the channels in
memory and to adjust the x olume.
@Mute Key--Press once to turn down the volume.
Press again to restore volume to previous level.
Number Keys--Two keys must pressed to select a
be
channel. Example: Press 0 then 6 to select channel 6. For
cable channels 100 tln'ough 125, press and hold the 1 key
until C 1 appears. Then press the other two nnmbers.
@Power Key--Press to tuna TV on or
of[..
Recall Key--Select a channel;
select another
channel using the number keys. Press
RECALL to switch between the channels.
Display Key--Press once to display the
Channel number. Press twice to display the
channel number continuously. Press again to
remove the display.
Sleep Key--Press this key then press the "0"
key to set the Sleep Timer. The desired time
can be set from 30 minutes tap to 3 hours.
Sleep Timer will switch off the TV
antomatically.
Note: The Sleep Timer cancels when the
TV is turned off or if a power failure occurs.
0 Remote Control