Sanyo CLT1554 Owner's Manual page 5

Getting Started
Positioning the LCD TV
Always use an appropriate table or stand when position-
ing your TV. Allow enough space to tilt the TV. For best
xiewing, avoid locating the TV where direct sunlight or
indoor lighting will fhll on the screen.
(Note," CLT1554
measurements are in the parenthesis.)
603.8 '*'-
(500.2)
co c::_ c4c._
- 1
I -2620- 1 244J
(262.0) (24.4)
(184.0)
Using the Detachable TV Tilt Stand
To change the viewing angle of your
LCD TV, position your hand on the
top and hold the stand firmly, then
tilt the LCD screen fk_rward or back-
ward. CAUTION: Do not position
hand under the screen while tilting
the TV forward.
Note; Maximum tilt is 5° to the
front and 10° to the back,
Removing the TV Tilt Stand
Tools Needed: Phillips screwdriver
Important Note: Position TV face down on a padded or
cushioned snrfitce to protect the screen and finish.
1. Remove the screw fi'om the stand back cover.
2. Remove tour (4) screws fi'om the metal bracket.
CAUTION: Hold the stand firmly as you remove the
last screw.
3. Carefully remove the TV stand.
Power Connection
O Insert AC Adaptor into the De input tem_inal on the TV.
Insert AC power cord into Adaptor; then insert the
plug fully into a 120V, 60Hz, AC power outlet.
BACK OFTV
OCPOWER
INPUT
TERMINAL
0
POWER OUTLET
(HOUSEHOLD]
AC
ADAPTOR
t
°l
AC CORD
1111111|11 r_--_! IIIIIIIHI
Positioning LCD, Using Tilt, Removing Stand, and Power Connection