Wall Mount Kit Specifications ( Vesa ) - Samsung FP-T5084 Owner's Instructions Manual

Wall Mount Kit Specifications ( VESA )
Instalt your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted walt, it may fail and result in severe personat injury.
Product Family
LCD-TV
PDP-TV
inch VESA Spec, (A* B}
200,100
200*200
600*400
700*400
(No VESA)
800*400
1400"800
600*400
800*400
23 ~ 26
32 ~ 40
46 ~ 52
57
57 ~ 70
80 ~
42 ~ 50
55 ~ 70
Standard Screw
M4
M6
M8
63 No VESA
80 ~ 1400 * 800
M8
Quantity
6
4
:_ We provided the standard dimensions for wall mount kits as shown in the table above.
:_ When purchasing our walt mount kit, a detailed installation manual and all parts necessary for assembly are
provided.
:_ Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
_-- For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
:_ Do not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
:_ Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used
or the consumer fails to follow the product installation instructions.
:_ Our 57" and 63" models do not comply with VESA Specifications. Therefore, you should use our dedicated watl
mount kit for this model.
_-- Do not exceed 15 degrees tilt when mounting this TV.