Using Automatic Picture Settings - Samsung FP-T5084 Owner's Instructions Manual

i Picture Control ]
Using Automatic Picture Settings
Your new Plasma TV gives you optimal control over the picture you're watching. You can change the screen size,
improve the image quality, even watch something else without turning off what you're currently watching. Please
be aware that the best picture on this TV will be obtained from High Definition (HD) sources such as Digital cable
or DVD players.
Your TV has three automatic picture settings ("Dynamic", "Standard", and "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, or Movie by making a selection from the menu.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
Press the ENTER button to select Mode.
Press the & or T button to select the Dynamic, Standard, or Movie picture
setting, then press the ENTER button.
* Choose Dynamic to increase the clarity and sharpness 0fthe picture,
, Choose Standard for general TV watching mode.
-Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
....... ,-J
...... "::7--11-----i
I _FAV.Cl4 _TIO_ _ I
,__,.__.___.___.__.__,,
3 Press the A or T button to select Contrast, Brightness, Sharpness, Color,
or Tint, then press the ENTER button.
Press the 4 or 1_ button to decrease or increase the value of a particular item.
Press the ENTER button.
_-- . Tint doesn't operate in PC mode.
. In PC mode, only the Contrast and Brightness can be selected.
. Each adjusted setting will be stored separately according to its input mode.
. When you make changes to Contrast, Brightness, Sharpness, Color, or
Tint. The OSD color will also be adjusted accordingly.
Continued...