R Freezing The Current Picture - Samsung FP-T5084 Owner's Instructions Manual

the Position of the PiP Window
Press the A or T button to select Position, then press the ENTER button.
Press the A or T button to select the desired PIP window position, then press
the ENTER button.
_,_ In Double Window ( _ ) and Double Wide ( _ ) modes, Position cannot
be selected.
_,_ If the PIP window is set to Double Window ( r_ ) or Double Wide ( _ )
mode, the screen size or alignment may slightly differ depending on the
signal type.
Chan igin=q t he PiP Channel
5 Press the A or _' button to select Channel, then press the ENTER button.
Press the A or _' button at the bottom of the remote to select the desired
channel in the PIP window, then press the ENTER button.
_,_ MAIN: PC / HDMt 1,2,3 / Component 1,2
PIP: TV(Analog)
Press the EXIT button to exit.
Press the PIP CH/_, and CH V buttons on the remote control to change the PIP
channel
!____J.L............ OJE ____O _L_*Z2_I'___JJ _____i
Freezing the Current Picture
Press the STILL button to freeze a moving picture.
Norma! sound wilt still be heard. Press again to cancet.
_-- To prevent screen burn-in, this function will automatically cancel after 5
minutes.
While V-Chip is in operation, the Still function cannot be used.
[-----If--_ . ..... ,cz...... _ZT-ll-----i
i i
h____l[ ll_____i