Selecting The Antenna; Adding And Erasing Channels - Samsung FP-T5084 Owner's Instructions Manual

i Channel Control ]
Selecting the Antenna
1 Press the MENU button to display the menu.
Press the _, or _' button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the _, or T button to select Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Press the ANTENNA button on the remote control to select Air or Cable.
If the antenna is connected to ANT1 IN(AIR_
select Air and if it is connected to ANT2 IN(CABLE_
select Cable.
', _ CHUST _UNK REC ',
........ °_ . .....
f both ANTI IN AIR) and ANT2 IN(CABLE are
connected selec[ the antenna mput you want. If the
antenna mout is not selected oroperiy, noise may
appear on the screen.
Adding and Erasing Channels
You can add or delete a channel to display the channels you want. To use the Channel List function, first run Auto
Program (see page 19).
1 Press the MENU button to display the menu.
Press the _, or T button to setect Channel, then press the ENTER button.
2 Press the _, or T button to select Channel List, then press the ENTER button.
3 Press the _, or _' button to select Added, then press the ENTER button.
Press the A/_'141_, buttons to select a channel to add, then press the ENTER
button.
Press the _, or _' button to select Add, then press the ENTER button to add the
channel.
Press the RETURN button to return.
All added channels will be shown in the Added menu.
Continued...