Samsung DVD-HD860 User Manual page 19

CONNECTIONS
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not includedL connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to tie DIGITAL AUDIO IN (OPTICAL} terminal of the AmDlifie_
If using a coaxial cable mot included), connect the DIGITAL
AUDIO OUT (COAXIAL} terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (COAXIAL} terminal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO. COMPONENT or DVI IN
terminals of your TV as described on pages 12 to 16.
3
Turn on the DVD player, TV. and Amplifier.
\
4
Press the mpu_select button of the Amplifier to select external
input n oraer to hear sound from the DVD _layer.
Refer to your Amplifier's user manual to set the Amplifier's
audio indus.
Note
-When you connect the DVD player to DTS Amplifier and play a DTS discl set the DTS to On in Audio
Setup menu, If it isset to Off, sound will notbe heard, or there will be a loud sound,
-Please turn the volume down when you turn on the Amplifier, Sudden loud sound may Cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 48 to 49)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
ENG-19