Samsung DVD-HD860 User Manual page 16

I CONNECTIONS
Connecting to a TV with DVI Jack
Using the HDMI-DVI cable (not included), connect the HDMI
OUT terminal Onthe rear of the DVD player to the DVI IN
terminal 0f y0ur TV.
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of Y0UrTV.
Turn on the DVD player and TV,
If
Press the input selector on your TV [emote control until the DVI
signal from the DVD player appears on your TV screen:
Connecting to a TV with HDMI Jack
1
Usingthe HDMI-HDMI c ablec )nnectthe HDMIOUT termina
on the rearof the DVDplayerto the HDMIIN terminalof you/
TV.
2
Presstheinputselectoror yourTV remote controluntilthe
HDMIsignalfrom the DVDolayerappearson yourTVscreen.
HDMI VIDEO Specifications
When you press the HDMI SEL. button, 480p, 720p, 1080i are selected in order.
The first press of the HDMI SELº button, brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player's output is set to HDMI/DVI automatically about
10 seconds later.
- If you set the HDMI output resolution 720p or 1080i, HDMI output provides better picture quality.
- If you set the HDMI output resolution 720p or 1080i, Video/S-Video and component output cannot be used.
ENG-16