Samsung DVD-HD860 User Manual page 10

I SETUP I
Rear Panel
1 2
1 3 4 5
1. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Delby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an AN Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder,
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR,P_and Y video.
- If Progressive Out ON Video Output is selected in
Setup Menu, progressive scan mode will work.
- If Progressive Out OFF Video Output is selected in
Setup Menu, interlaced scan mode will work.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
4. VIDEO OUT JACK
Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
S-Video.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality,
- The Video Output in Setup Menu must be set to
S-Video.
6. HDMI OUT JACK
Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
If you want to use a Video, S-Video or Component
Output, unplug HDMI cable.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- If Progressive Out ON Video Output is selected in Setup Menu, Video output work and S-Video Outputs do
not work.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVl input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 50 - 52 to get more information on how to use the setup menu.
ENG-IO