Table of Contents
Advertisement
CONNECTIONS
Choosing
a Connection
The following shows examples
of connections
commonly
used to connect the DVD player with a TV
and other components.
Before
Connecting
the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user's manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection
to a TV
(Video)
1
Usingvlaeo/audio cables,connectthe VIDEO(yellow)/AUDlO
(redandwhite) OUTterminalson the rearof the DVDplayer
tothe VIDEO(yellow)/AUDlO (red andwhite} IN terminalsof
yourTV
2
Turnon the DVDplayerandTV.
3
Pressme inputselectoron yourTVremotecontroluntilthe
Videosignalfrom the DVDplayerappearson theTVscreen.
°l
AUDIO IN
VIDEO IN
Note
-Noise
may be generated if the audio cable placed to0 close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (Progressive : ON -_ Progressive : OFF).
- If you set the HDMI output resolution 720p or 1080i, Video/S-Video and component output cannot be used.
ENG-12
Hide quick links:
Advertisement
Table of Contents
