LG 26LX1D - - 26" LCD TV Owner's Manual page 94

Operation
PIP (P ict ure-I n-P ict ure)/P 0 P/Tw in Pict u re
- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the
other source will show a smaller inset image.
- Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same
time. Each source is given half the screen.
Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below.
PIP Mode POP Mode Twin Picture Mode
PIP Off
I
Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button
changes the PIP source. You can also select sources for the Sub Input in the SETUP menu.
Main Picture Source Available Sub Picture Sources
DTV Signal Analog, Video1, and Video2
Analog Signal DTV, Analog, Video1, and Video2
1. Press the PIP button.
2. Select the Antenna or Cable option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+
/ PIPCH- button to select a channel for the sub picture. (You can't select DTV for main and sub picture
simultaneously).
In PIP mode, press the •/T/_1/1_ button to move the sub picture to a
different location on the screen.
94