Table of Contents
Advertisement
09.Color (Command2:i)
•
To adjust the screen color.
You can also adjust color in the Video menu.
Transmission
I[k][i][ ][Set ID][ ][Data][Cr]
J
Data
Min:0~Max:64
• Refer to 'Real data mapping'. See page 104.
Acknowledgement
I[i][ ][Set ID][ ][OK][Uata][x]
J
10. Tint (Command2:j)
•
To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission
I[k][j][ ][Set ID][ ][Data][Cr]
J
Data
Red:0~Green:64
• Refer to 'Real data mapping'. See page 104.
Acknowledqement
I[j] [ ][Set ID][ ][OK][Uata][x]
J
11. Sharpness
(Command2:k)
•
To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission
_k][k][ ][Set ID][ ][Data][Cr]
J
Data
Min: 0 ~ Max: 64
• Refer to 'Real data mapping'. See page 104.
Acknowledgement
_k][ ][Set IU][ ][OK][Data][x]
J
12. OSD Select (Command2:l)
• To select OSD (On Screen Display) on/off.
Transmission
I[k][I][
][Set ID][ ][Data][Cr]
J
Data
0:OSDoff
l:OSDon
Acknowledgement
I[I][ ][Set ID][ ][OK][Data][x]
I.
13. Remote
Control
Lock
Mode
(Command2:m)
•
To lock the remote control and the front panel controls on
the set.
Transmission
[[k][m][
][Set ID][ ][Data][Cr]
J
Data 0: Lock off
1: Lock on
Acknowledgement
[[m][ ][Set ID][ ][OK][Data][x]
I
Reference
14. PIP/POP/Twin
Picture
(Command2:n)
•
To control the PIP (Picture-in-Picture)/POP/Twin
picture.
You can also control the PIP/POP/Twin
picture using the
PIP button on the remote control.
Transmission
[[k][n][
][Set ID][ ][Data][Cr]
J
Data 0: PIP off
2: Twin Picture
1: PIP
5: POP
Acknowledgement
[[n][ ][Set ID][ ][OK][Data][x]
I
15. PIP Position
(Command2:q)
•
To select sub picture position for PIP.
Transmission
[[k][q][
][Set ID][ ][Data][Cr]
J
Data 0: Right down on screen
1 : Left down on screen
2: Left up on screen
3: Right up on screen
Acknowledqement
[[q][ ][Set ID][ ][OK][Data][x]
J
16. Treble
(Command2:r)
• To adjust treble.
You can also adjust treble in the Audio menu.
Transmission
I[k][r][
][Set IU][ ][Data][Cr]
J
Data
Min: 0 ~ Max: 64
• Refer to 'Real data mapping'. See page 104.
Acknowledgement
I[r][ ][Set ID][ ][OK][Uata][x]
J
17. Bass (Command2:s)
• To adjust bass.
You can also adjust bass in the Audio menu.
Transmission
I[k][s][ ][Set ID][ ][Data][Cr]
J
Data
Min: 0 ~ Max: 64
• Refer to 'Real data mapping'. See page 104.
Acknowledqement
I[s][ ][Set ID][ ][OK][Data][x]
J
18. Balance
(Command2:t)
• To adjust balance.
You can also adjust balance in the Audio menu.
Transmission
I[k][t][
][Set ID][ ][Data][Cr]
J
Data
Min: 0 ~ Max: 64
• Refer to 'Real data mapping'. See page 104.
Acknowledgement
I[t][ ][Set IU][ ][OK][Data][x]
J
105
Advertisement
Table of Contents
