Table of Contents
Advertisement
Installation
- When RGB connect to PC input and select the RGB-PC in Main Input, this function is used.
- When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.
- In RGB-DTVmode.
SIZEandPHASEisnetavailable.
- In HDMI/DVI-PC mode. PHASE is net available.
- After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
* Adjustment for screen Position. Size, and Phase
1
Press the ADJUST
button and then use • / V button to select POSITION.
SIZE.
or PHASE.
Position
This ft, qction is to adjust
picture
to left/right
and
up/down as you prefer.
2
Press ENTER
button
and then use • I V / < !l_ buttons
to make appro-
Size
This function
is to mini-
priate
adjustments.
• The PHASE adjustment
range is -16 - +16.
mlze any vertical
bars or
stripes
visible
on
the
.The SIZE adjustment
range is-50
~ +50
screen
background.
And
the qorizontal
screen size
will also change.
Phase
This function allows you to
remove
any
horizontal
noise and clear or sharpen
the image of characters.
3
Press ENTER button.
* Initializing (Reset to original factory
values)
- To initialize the adjusted values
1
Press the ADJUST
button and then use •
/ V button to select the
RESET option.
2
Press ENTER button and then use < / I_ button to select Yes.
3
Press ENTER button.
35
Advertisement
Table of Contents
