LG 26LX1D - - 26" LCD TV Owner's Manual page 25

Installation
32,37.42inch TV Back
S-VIDE0 MONITOR
-- COMPONENT1 --
@0@0@
,uo,o,N Ut
26 inch TV Back
J LJ
[]
@(
AUDJO4L
DVD DVD
Select or , depending on your DVD connector.
Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT1 VIDEO INPUT jacks on the set.
Connect the audio outputs of the DVD to the COMPONENT1 AUDIO INPUT jacks on the set.
Connect the optical audio output of the DVD to the DIGITAL AUDIO COMPONENT1 INPUT jack on the set.
Turn on the DVD player, insert a DVD.
Select Component I input source with using the TV/VlDEO button on the remote control.
- If connected to COMPONENT2 input, select Component 2 input source.
Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to the component _nput ports as shown below.
Component ports on the TV
• Digital Audio will not work for Component 2 input source
• Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time.
25