Table of Contents
Advertisement
Operation
Basic oDeration
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the ON/OFF, TV/VIDEO, CH • / • button on the TV or press the POWER,
TV INPUT, TV/VIDEO, CH • / •, Number (0 - 9) button on the remote control.
2. Select the viewing source by using TV INPUT, TV/VlDEO button on the remote control.
This TV is programmed
to remember which power state it was last set to, even if the power cord is out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
1. Press the VOL •
/ • button to adjust the volume.
2. If you want to switch the sound off, press the MUTE button.
3. You can cancel this function by pressing the MUTE or VOL • / • button.
Press the CH • / • or NUMBER buttons to select a channel number.
If you intend to be away Onvacationl disconnect the power plug from the wall power Outlet.
• After turning 0nthe TV, it will take up to a week for the TV Guide On Screen system to receive fu!l iistings data.
• When the "I'V is turned On, the TV Guide Qn screen system is autQmatica!lydisplayed, The screen may be slightly delayed
if the TV was unp!ugged and then powered On.
- The menus can be shown on the
screen in the selected language.
First select your language.
1
Press the MENU button and then use •
/ •
button to select the
OPTION menu.
2
Press the I_ button and then use • / •
button to select Language.
3
Press the I_ button and then use •
/ • button to select your desired
language. From this point on, the on-screen menus will be shown in the
selected language.
4
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
69
Advertisement
Table of Contents
