Table of Contents
Advertisement
EnergySaver
By default,
this VCR automatically
turns off after two hours of
inactivity.
Press 4 to change the time delay, or to disable the
feature.
OFF: The VCR will remain turned
on until you shut it off.
1:00, 2:00, or 3:00: The VCR turns off after one, two, or three
hours of inactivity.
Thirty
seconds before shutting
off, the VCR will warn you with a
screen reading,
"The VCR will turn off in 30 seconds.
Press any
key to cancel."
If you use the VCR's tuner instead of your TV to tune channels,
you may want to turn this feature off.
Front Panel Brightness
(VCR Display)
You can change the brightness
level of the fluorescent
display
panel on the front of the VCR. Press 5 to switch between the
options.
AUTO brightens
the display when the VCR is on and dims
the display when the VCR is off.
BRIGHT keeps the display
bright.
DIM keeps the display
at a low brightness
level.
Auto play
For a tape to be able to start playing
automatically,
it must have the safety
tab removed. All rented movies and
purchased movies should have this
tab removed.
Preferred
Tape Speed
You can set the preferred
tape speed between Standard
Play
(SP) and Super Long Play (SLP). In the PREFERENCES menu,
press 5 to switch between the options.
SP sets the peferred
recording
speed to S.P
SLP sets the peferred
recording
speed to SLP
Set Auto Repeat
A tape can be set to play the same segment over and over in a
repeating
loop with the Set Auto Repeat feature.
Set Auto
Repeat uses the VCR's memory counter to determine
the
duration
of the loop.
Continued on Next Page
17
Advertisement
Table of Contents
