Setting Time And Date Manually - GE VG2050 User Manual

SET DAYLIGHT SAVINGS
Does your area observe
DayLight Savings Time
from April to October?
I Yes, DST is observed
2 No
3>Automatic
Press MENU to continue
4.
Select one of the options.
DST is the aconym for Daylight Saving Time.
If you chose AUTOMATIC, the VCR sets the clock using the
DST information broadcast in the signal (channel).
Setting Time and Date Manually
If the Auto Clock Set was unsuccessful, set the clock through the
menu option. The Auto Clock Set feature is set to OFF
automatically when you set the clock this way
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
I Timer Recordings
2 Time
3 Channels
4 Setup
5 Preferences
6 Language/Langue/Idioma
0 Exit
Spring Forward; Fall Back
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2:00 AM to 3:00 AM
(forward one hour), remember to
include the extra hour for timer
recording falling within this time
frame.
In the Autumn, daylight-saving time
ends on the last Sunday in October.
The VCR clock automatically changes
from 2:00 AM to 1:00 AM (back one
hour). Therefore, it can affect your
recording length.
2. Press 2 to display the TIME menu.
TIME
1 Set Time and Date
2 Set Time Zone
3 Set Daylight Savings
0 Exit
3. Press 1 to display the SET TIME AND DATE menu.
SET TIME AND PATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
14