Table of Contents
Advertisement
Recording
If you want to record something
that you're watching,
you can
use basic recording.
For more detailed information,
refer to the
"Recording"
section starting
on the next page.
1.
Set the tape speed by pressing the SPEED button on the
remote.
2.
Press RECORD (REC on remote) to begin recording.
3.
Press STOP to stop recording.
If you just want to pause the recording
for a short time
(such as during a commercial),
press PAUSE instead of
STOP.
For more information
about in-depth
recording
features,
refer to the next section.
Check the Safety Tab
No matter which recording
option
you use, you need to make
sure there is a tape in the VCR, and that the tape's safety tab is in
place. You cannot record on a tape with the safety tab removed.
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape.
SLP (Super Long Play)
Gives three times the recording time
of tapes recorded in SR Special
effects such as pause, slow motion,
picture search, and frame advance
work well when you play back tapes
recorded in this speed.
Recording
Time
Cassette
SP
SLP
T- 120
2Hr
6Hr
T-160
2 hr/40 min
8Hr
8mfe_" T_
If the safety tab is removed
and you want to record over it,
simply cover the hole with vinyl tape.
23
Advertisement
Table of Contents
