Table of Contents
Advertisement
Using
the
TV/VCR's
Features
8:40AM THU
CH 012
00:30:00 SP
/
I
\
/
I
\
Hours Minutes
Seconds
Time Counter
The time counter sbows the actual time used in recording
or playing back a
tape. The time counter helps locate the beginning
or end of recorded
events. It
resets to 00:00:00 whenever
a tape is ejected fl'om the TV/VCR.
For example,
if you record a 30 minute program
at the beginning
of a tape,
rewind it, and then want to go to the end of the first program to start another
recording:
1.
Press the CALL button to display the time counter.
2.
Press the RESET button to reset the time counter to 00:00:00.
3.
Press FORWARD to advance a tape until the time counter reads 00:30:00.
4.
Press STOP. This is the approximate
end of a 30-minute program (you may
want to press PLAY to verify). When the tape is cued correctly, you can
begin recording.
5.
Press the CALL button to remove the time counter from the screen and
return to the normal display mode.
8:47AM MON
CH 012
00:04:38 SP
ChannelBanner
There are several indicators
that might appear when you press the CALL button.
This display is called the Channel Banner. The following list describes
the items
on the Channel Banner screen (left to right and top to bottom).
8:47AM
MON
CH 012
0
Displayed
when a tape is playing. This symbol changes
depending
what playback
mode you are in. (See Playback
Mode symbols on next page).
Displays the current time.
Displays the current day.
Displays the current channel
or input channel.
Displayed
when Auto Repeat has been set.
Displayed when a cassette is loaded in the VCR.
00:04:38
SP
Displays tbe amount of time the tape has played
Displays the tape speed.
26
Chapter
2
Advertisement
Table of Contents
