Automatic Tracking; Manual Tracking; Time Counter - RCA T25061GY User Manual

Using the Playback Features
Automatic Tracking
The TV/VCR has automatic tracking which adjusts the
picture when playing a tape that was recorded on
another VCIL Automatic tracking is turned on
whenever a tape is inserted or the TV/VCR's power is
turned on.
Manual Tracking
Occasionany, you may need to manually adjust
tracking
on a
tape
recorded on a different VCR or
camcorder. Tracking is used when playing a tape. It
has no effect during recording.
* When streaks or snow appear in the picture during
normal playback or slow motion, press TRACK + or-
on the remote or CH A or V on the TV/VCR for the
best possible picture.
• To turn automatic tracking back on, simultaneously
press and hold both of the CH buttons on the front of
the TV/VCR for 2 seconds.
Time Counter
The time counter helps locate the beginning or end of
programs you taped. The time counter automatically
resets to 0:00:00 whenever a tape is inserted, or you
can press CLEAR when the time counter is displayed.
For example, if a 30-minute program was recorded at
the beginning of the tape and you want to record
another program after it, you should:
1. Insert the pre-recorded tape.
2. Press DISPLAYtwice to display the time counter.
0:00:00
Minutes
3. Press FF to fast forward the tape until the time
counter reads 0:30:00.
This is the approximate end of the program and you
can
begin recording
at this spot. (You still might
want to verify this by playing the tape.)
/
/
/
14