Table of Contents
Advertisement
Using
the
TV/VCR's
Features
7.
8.
9.
Review tile infk)rmation to make sure it is correct, and then press ENTER to save. If you
have made a mistake press CANCEL until the item you want to change is selected, then use
tile up or down arrow button to enter tile correct information.
Repeat steps 4 7 for additional
programs.
Press the TIMER button (the T REC indicator on the TV/VCR's front panel lights). To cancel
timer recording
press the TIMER button again (the T REC indicator goes out).
Note: The VCR cannot
be used while the TREC indicator
is lit. lf you want to use the
VCR, press the TIMER button to deactivate.
Copying and Editing Tapes
Use another VCR or camcorder
as the playback
VCR and the TV/VCR as the recording
VCR.
Note: The unauthorized
recording
of television programs
and other materials may
infringe upon the rights of others.
1.
Insert a tape with the safety tab in place into the TV/VCR. The TV/VCR will turn on.
2,
Press the INPUT button to tune the TV/VCR to the AUDIO/VIDEO
input jacks on the back
of the TV/VCR. LINE 1 appears
on-screen.
Press the INPUT button again to tune the TV/
VCR to the AUDIO/VIDEO
input jacks on the front of the TV/VCR. LINE 2 appears
on-screen.
3,
4.
,
6.
Insert the tape you want to copy into the playback
VCR or camcorder.
Start the playback VCR or camcorder
playing.
If the tape was not recorded
on the playback
VCR, streaks may appear and you may need to adjust the tracking.
When you reach the
place you want to begin copying, place the playback
VCR or camcorder
in play pause.
Press RECORD and PLAY simultaneously
on the TV/VCR, then press PAUSE.
Press PAUSE on both the VCR or camcorder
and the TV/VCR's remote at the same time to
begin copying the tape.
7,
Edit segments
that you don't want to copy by pressing PAUSE on the TV/VCR's remote to
pause the tape. Then, locate the next segment
you want to copy on the playback
VCR or
camcorder
by using FORWARD, REVERSE, or PLAY. Press PAUSE on the playback
VCR or
camcorder.
Press PAUSE at the same time on both the VCR or camcorder
and the TV/VCR's
remote to resume copying.
8.
Press STOP on both the VCR or camcorder
and the TV/VCR's remote when you're finished.
24
Chapter2
Advertisement
Table of Contents
