Table of Contents
Advertisement
USING
POINT
AND
SELECT NAVIGATION
You only need to know one rule when using the remote to access on-
screen menus and control
panels: point and select. The point and select
method
has two steps.
1.
Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point left or
right, press the left or right arrows.
2.
Select a menu item by pressing MENU.PROG.
Selecting an item tells the TV's menu system to go ahead and make
the change or go to a place you have indicated.
ENTERING
SETUP
The first screen of the Interactive
Setup appears automatically
when
you turn on your TV for the first time or after a power outage.
1.
Press MENU.PROG to begin setup or CLEAR to exit.
%7
Point and Select buttons
You can also access the Interactive
Setup through
the Main menu:
1.
Press MENU.PROG to bring up the Main menu.
2.
Point to Setup and press MENU.PROG.
The first Setup screen comes
up, asking you to confirm
that you want to begin.
You can also select a menu item by
entering the item number with the
number buttons on the remote.
Press CLEAR at any time to remove all
displays from the screen and return to TV
viewing.
Many VCR user manuals refer to a
PROGRAM button. The MENU.PROG
button on this remote works as a
PROGRAM button in VCR mode for RCA,
GE and PROSCAN
VCRs.
12
Advertisement
Table of Contents
