Table of Contents
Advertisement
ASSEMBLY
4
Two persons are recommended in order to assemble the system. Set all parts in a cleared area.
Make sure that all parts are Included before disposing of the packing materials.
Read each step
carefully before beginning. Assembly can be completed using a standard screwdriver and two
adjustable wrenches (not included).
.
.
,
.
Press a Front Stabilizer Endcap (70) onto each side of
the front stabilizer of the Frame (1). Slide the Base
Extension
(47) onto the Frame, and align the holes.
Attach the Base Extension with the two Extension Bolts
(48) and Nylock Nuts (3).
Rotate the Leg Lever (42) to the position
shown.
Insert
the bracket on the Seat Support (40) into the slots in the
Side Shields (55, 56).
Slide the bracket onto one of the
three sets of pins welded to the Frame (1).
Use the pins
which set the Seat Support in the most comfortable
exercising position.
WARNING:
Be sure the pins are
Inside of the slots in the bracket.
Slide the four Leg Lever Pads (41) onto the posts on the
Seat Support (40) and Leg Lever (42).
Attach the Hand Control (51) to the Control Stand (50)
with the two Control Stand Screws (69). Plug one end of
the Control Cord (49) into the Hand Control. Plug the
other end of the Control Cord into the Control Cord
Socket (67) at the front of the system.
Press a Rear Stabilizer Endcap (2) onto each end of the
rear stabilizer of the Frame (1).
Plug the Power Cord
(68) into the socket at the back of the system.
70
67
4
68
Hide quick links:
Advertisement
Table of Contents
