Table of Contents
Advertisement
5.
Press STOR
6.
Press SEARCH on the remote twice
to display the ZERO
SEARCH menu.
7.
Press REVERSE to return to 0:00:00 on the tape.
Commercial
Scan (Search
Button)
This is useful for skipping
commercials
or short program
segments.
Press SEARCH once during playback to advance the tape
approximately
30 seconds of recorded
material.
Each press of the SEARCH button adds an additional
30
seconds
up to five minutes.
ZERO
SEARCH
Current
tape
counter
is
2:17:25
Press
REV
to
go
to
0:00:00
Press
SEARCH
to
exit
ZERO
SEARCH
Searching
for
O:O0:O0
Press
STOP
to
cancel
Tracking
Your VCR has automatic
tracking which removes
the streaks or
snow from the picture. Automatic
tracking
is activated when
you insert a tape or turn on the VCR. Occasionally
you may
need to manually
adjust tracking,
especially
if the tape was
recorded
on a different
VCR. Just use the TRACKING buttons
to
remove the streaks or snow. You can also use tracking when
you pause a tape to reduce jittering
of the picture.
When you manually
adjust the picture, automatic
tracking
is
turned off. To turn automatic
tracking
back on, press both
TRACKING buttons
on the front of the VCR at the same time, or
eject the tape and re-insert it. Tracking has no effect during
recording
- only playback.
Pro-Tect Plus
TM
Locking Feature
To disable the usage of the VCR, or to protect your timer
recordings,
you can lock the VCR so that the buttons on the VCR
or remote won't work.
•
To Lock: Press and hold theVCR
button on the remote
for approximately
six seconds. SAFE appears in the VCR's
display panel when the VCR is locked,
To Lock While a Timer
Recording
is in Progress:
Press
and hold the VCR button on the remote for approximately
six seconds,
To Unlock:
Press and hold the VCR button on the remote
for approximately
six seconds.
Locking Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
42
Advertisement
Table of Contents
