GE VG4065 User Manual page 13

CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR PLus+ Channel list
5 Cable Box Setup
0 Exit
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
3>Detect Automatically
0 Cancel
4,
Select one of the three AUTO CHANNEL SEARCH options,
your choice will be marked with an arrow symbol at the left:
Cable TVsearches for cable stations from a single channel
Antenna searches for local broadcast stations on all
channels
DetectAutomaticallywill make this decision for you
AUTO CHANNEL SEARCH
Now scanning charmer 14
Press any key to cancel
The VCR begins scanning for the available channels--this takes
about one to two minutes. When the scan is complete, the VCR
tunes to the lowest channel number available. At this point,
pressing CHAN up or down should only select the active
channels.
Auto Channel Search
Use the Auto Channel Search feature
to place all available channels in
memory.
If you ever change cable or antenna
signals, you may need to Auto
Channel Search again.
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.
11