Poulan Pro 2055 Instruction Manual page 8

KNOW YOUR CHAIN SAW
READ THiS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourseff with the location of
the various controls and adjustments. Save this manual for future reference.
Chain Front Hand Guard ''_- f-_ ,j Front Handle
Adjustment Tool [ [\ _ t I," Starter Rope
(Bar Tool) I _'_--_ // ON,STOP
Chain Muffler [ _ _//_ P_mber
Bar Oil Fill Cap Housing Fuel Mix Fill Cap
Cylinder Cover
Throttle Chain
Lockout Direction
Rear _djusting of Travel
Handle
Gu
Throttle Choke/ {' Chain Brake \
Trigger Fast Idle Chain Chain Nuts Bar Sprocket Hole
Lever Brake Catcher
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE TRIGGER contrc_s engine
speed.
THROTTLE LOCK-OUT
The THROTTLE LOCK-OUT must be
pressed before you can squeeze file throttle
trigger. This feature prevents you ffom acci-
dentally squeezing the tdgger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pulling the
CHOKE_AST iDLE LEVER out to the full ex-
tent for cc_d,stedJn_,or after refueling. The
choke provides additional fuel to the engine
dunng cold sta_ng.
PRIMER BULB
The PRIMER BULBcirculatesfuel to the car*
buretcr to provide quicker starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed to
stop the chain if kickback occurs. The chain
brake activates automatically in the event of
kickback. The chain brake activates manually
if the front hand guard is pushed forward. The
chain brake is disengaged by pul_ingthe front
hand guard back toward the front handle asfar
as possible.
CHAIN TENSION
_tis normalfcr a hen chaffl to stretch durin _g the
first 15 minutes of operation. Youshould check
your chain tension frequently. See CHAIN
TENStON under the ASSEMBLY section.
WARNING: Muffler is very hotdur*
ing and after use. Do not touch the muffler or
allow combustible materia_ such as dry
grass or fuel to do so.