Oki ML490 Maintenance Manual page 83

No. Item
Gap between the con-
tact and the monitor
42114101 Rev.1
Specification
0.3mm or more
Contact
Drawing
Adjust lever
Motor PCB
Touching
Adjustment method
Confirm followings.
Make sure that the
gap between the con-
tact and the motor
PCB is 0.3 mm or
more.
0.3mm or
more
At the time of printing
test, make sure that
the contact touches
the motor PCB and it
becomes reduced
speed mode when the
adjust lever is set to
range 2 and 4.
83 /