Important User Guidance Information - Pioneer PDP-4350HD Operating Instructions Manual

Important User Guidance Information
,_ CAUTION
Panel sticking and after-image lag
• Displaying tile same images such as still images for a long
time may cause after-image lagging, This may occur in the
following two cases,
1. After-image lagging due to remaining electric
load
When image patterns with very high peak lumblance are
displayed more than 1 minute, after-image lagging may occur
due to the remaining electric load, The after-images remaining
on the screen will disappear when moving images are
displayed, The time for the after-images to disappear depends
on the luminance of the still images and the time they had
been displayed,
2. After-image (lag image) due to burning
Avoid displaying tile same image on tile Plasma Display
continuously over a long period of time, If the same image is
displayed continuously for several hours, or for shorter periods
of time over several (Jays, a permanent after-image may remain
on the screen due to burning of the fluorescent materials, Such
images may become less noticeable if moving images are later
displayed, but they will not disappear completely,
• The Energy save function can be set to help prevent damage
from screen burning (see page 43),
About operations through i.LINK,
PIONEER shall not always assure normal video/audio recording
or playback when a D-VHS is operated through i,LINK,
,_CAUTION
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART,
STAND, TRIPOD, BRACKET, OR TABLE, THE PRODUCT MAY
FALL, CAUSING SERIOUS PERSONAL INJURYAND SERIOUS
DAMAGE TO THE PRODUC]] USE ONLY WITH A CART, STAND,
TRIPOD, BRACKET, OR TABLE RECOMMENDED BYTHE
MANUFACTURER, OR SOLD WITH THE PRODUC1] FOLLOW
THE MANUFACTURE'S INSTRUCTIONS WHEN INSTALLING
THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BYTHE MANUFACTURER,
A PRODUCT AND CART COMBINATION SHOULD BE MOVED
WITH THE CARE, QUICK STOPS, EXCESSIVE FORCE, AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART
COMBINATION TO OVERTURN,
m
t_
ER