Preparation; Installing The Plasma Display; Preparation Installing The Plasma Display - Pioneer PDP-4350HD Operating Instructions Manual

Preparation
Installing the Plasma Display
Over 50 cm (19 _/_ inches)
Over10
cm(315/16
inches )
Using the optional PIONEER stand
For details on installation, refer to the instruction manual
supplied with the stand,
_ CAUTION
• This product may be used only with model PDK-TS04 stand,
Use with other stands may result in instability causing
possible injury,
Using the optional PIONEER speakers
For details on installation, refer to the instruction manual
supplied with the speaken
_ CAUTION
Operating Environment
Operating environment temperature and humidity: +0°C to
+40°C (+32°F to +104°F)1 less than 85% RH (cooling vents not
blocked)
Avoid installing at the following locations:
• Under direct exposure to sunlight
• Under strong arlificial light
• In high humidity
• Poorly ventilated
m
i
i,
t_
Illustration shows PDP-5045HD/4345HD,
Locating
• Avoid direct sunlight, Maintain adequate ventilation,
• The length of the system cable used to connect the Plasma
Display and the Media Receiver is about 3 m (9,Sleet),
• Because the Plasma Display is heavy, be sure to have
someone help you when moving it,
_lL CAUTION
• If you place anything on the top of the Media Receiver it will
not receive enough ventilation and will not operate properly,
NOTE
• Allow enough space around the upper and back parts when
installing to ensure ventilation around the backside,
En