Table of Contents
Advertisement
Picture
Menu
The Pictzu'e menu contains menus and controls to configure
the following video
settings: Advarzced pictzu'e settit_s, Pictzu'epresets, B/ac_ _, M z,,e/,ColoJ: Cot_tl_Ist,
3't_aJTmess, (;olor Warmtt_, and Tim. The Picture menu options apply to the
video for the main TV and video input selections.
T_p:
If the picture
is switching
screen
formats
abruptly
during
normal
TV viewing,
switch
the
Autoforrnat
feature
off.
Advanced
picture
settings
(]ot_tF_tstexpat_d
You can adjust the contrast of the picture to suit the light
of the room. Press the right arrow button to choose which of the following
best describes the lighting in the room: Low, Mediztm or H{gh.
3'c-atzVelocity Modzdatiot_
Improves the sharpness
of the picture by
changing the speed of the cathode-ray
tube's electron beam when it
transitions
between
dark and light areas of the screen. Choose to have it on
(box checked)
or off (box unchecked),
depending
on your preference.
A_lto/'om_lat
When enabled
(box checked)
the TV automatically
selects the
best screen format for the incoming
signal for analog channels
and inputs.
The Autoformat
feature is not available for digital channels.
IJdeo tzoise _'edztctiot_ Reduce picture "static" or any type of interff_rence.
This ff:ature ix especially usefld for providing
a clearer picture in weak
analog signal conditions.
Press the right arrow button
to
choose bet_veen:
Oi`)"for no noise reduction;
Mit_imztm for a softer, smoother
picture that
retains picture sharpness
and detail; Medi_tm for a slightly softer picture
than the Mit_im_tm setting; Maximztm
for an even softer, smoother
picture
than the other settings (the picture detail is somewhat
decreased).
Optimized
sti/lpicmre
When enabled
(box checked),
enhances
the picture
specifically for still frames (for example, if you're watching a slide show on
your HDTM or if you've paused
a frame of a DVD).
A_tto 5_;it_T(me
When enabled
(box checked), minimizes
the flesh tone
variations of the TV picture.
Film mode (3:2Pzdldowtz)
Automatically detects video sources that were
originally recorded
on fihn (like most movies) and subsequently
converted
to a different format (for TV broadcast,
for example).
Film mode processes
the converted
signal so that it looks as close as possible to the original.
Another name for this process ix reverse 3:2 pulldown.
Note: Film mode is not available for digital channels.
Ach,atzc-ed (re('ommended)
enables the feature only when the TV
detects that movie playback
quality could be improved.
Ach:atzced is
the default setting.
The Otz setting should only be used in rare circumstances
when
the TV ix used solely with film-based sources (like 1)V1)s on a non-
progressive-scan
playeO.
The (),/,)"setting turns off film mode upconversion.
Try using this
setting if you think the reverse 3:2 pulldown
ix causing distortions in
your picture.
Note: Autoformat and Video noise reduction are available for the CMP1
and CMP2 inputs only if the signal is 480i.
44
Advertisement
Table of Contents
