Table of Contents
Advertisement
Note:
If you're
using
an HD source
(such
as a separate
HDTV
tuner
or HDTV
satellite
receiver)
on
the
CMP or DV! inputs,
you
should
run
Auto
convergence
separately
for that
input
as well
Tune
to the
input
you're
using
for
the
HD
source,
then
go to page
51 for
information
on
Auto
convergence.
Changing
Lists and Labels
The List & Labds
part of the setup
lets you edit your channd
list and
choose
o1
create
a personal
six-character
label for each channel.
Note: Changing
List and Labels can be time consuming.
You can
change
these
at a later time by accessing
the Setup menu.
1.
Press the left or right arrow
button
to scroll through
the dmnncls
and
choose
the one you want
to edit.
Note: Labels for digital
channels
cannot
be changed--they
come
from the signal sent by the broadcaster.
If you're
on a digital channel
and you want to switch to an analog channel, press the ANT, CABLE
button
on your remote.
2.
Press the down
arrow
to highlight
the In channel
list option.
Press the left
or right arrow
button
to add (the box is checked)
or remove
(the box is
unchecked)
the channel
from the list.
3.
Press the down
arrow
to highlight
the Channel
label option.
Press the left
or right arrow
button
to scroll through
the available
list of 25 most
common
labels.
The last option
in the list allows
you to create
your own six-character
label
for the channel
(the first letter of the label
is highlighted).
4.
Press the 1 or 2 number
button
to change
the first letter
of the label.
5.
Press the right arrow
to highlight
the second
letter,
then press
the 1 or 2
number
button to change
the second
letter,
etc...
6.
When
you are finished
creating
your label,
press
OK. Select
Go back ), to go
to the Aztto Conve<qence
menu.
Automatic
Convergence
YoHr HDTV's
picture
robes
might
have been
disturbed
(hiring
delivery
or after
you moved
the HDTV, causing
the color
in your HDTV to be out of alignment.
The colors
adjust
by starting
auto
convergence.
1.
2.
.
IMPORTANT: Auto
convergence
works best once the HDTV has warmed
up for at least an hour. If you've just unpacked your HDTV, it's a good
idea to repeat the Auto convergence
function
when the HDTV's been
running
for at least an hour. See page 51 for more information
about Auto
convergence.
Press OK to begin
auto convergence.
When
the auto convergence
is complete,
the Red center
cotwe<qe,we
menu
appears.
The cross in the middle
of the screen
should
be yellow.
If it is not,
use the arrow
buttons
to move
the red cross
to overlap
the green
cross.
Press OK when
adjustments
are complete.
The Bhle ce_zter co,we<_e,zce
menu
appears
with a cyan cross
in the middle
of the screen.
If it is not, use the arrow
buttons
to move
the blue cross
to overlap
the green
cross.
Press OK
(the TV tunes to
the last selected/
available
channel
in the channel
list).
Chapter
1
17
Advertisement
Table of Contents
