Table of Contents
Advertisement
TV + Satellite
1.
Receiver + VCR
Connect
your VCR to your
TV.
A. Connc('t
a coaxial
('abk: to the VCR's antenna
output
jack and to the ANTENNA/CABLE
ANALOG
INPUT
jack on the TV.
B. Connect
the audio
(white
and red) cables
to the V]D2 L/MONO
and R audio
jacks on the
back
of the TV and to the Audio
Output
jacks
on the VCR.
C. Connect
the video
cable
to the VID2 V (Video)
jack on the back of the TV and to the video
output
jack on the VCR.
2.
Make
sure
cable
or antenna
is connected
to your
¥CR.
Connect
the coaxial cane
from your cane
outlet ol antenna
to the antenna
input jack on the VCR
3.
Connect
your
Satellite
Receiver
to your
TV.
Note: Use the best connection
offered by your satellite
receiver--if
your satellite
receiver has
component
video jacks, connect those
A Conne(t
the audio (white and red) cables to the VID1 L/MONO and R audio jacks on the
back
of the TV and to the audio
output
jacks
on the satellite
receiver
B Connect
the video
cable
to the VID1 V (Video)
jack on the back
of the TV and to the video
output
jack on the satellite
receiver
C If your satellite
receiver
has an S-Video
jack, connect
an S-Video
cable
(instead
of the
video
cable
in step B) to the S-VIDEO
jack on the TV and to the S-VIDEO
output
jack on
the satellite receiver
4.
Connect
the coaxial
cable
from
an off-air
antenna
to the ANTENNA
DIGITAL
INPUT jack.
Note: Do not connect a digital
cable signal to this input.
• To review other
connections,
go to the
next page.
• If you
are done
connecting
devices
to
your
TV, go to page
18 to
complete
the Initial
Setup.
• If you want more details
of the jacks on your TV, go
Ckaptey
l
13
Advertisement
Table of Contents
