Mitsubishi CS-31505 Owner's Manual page 37

TV + audio system
equipment you will need
To hook up an audio system, you
will need:
° one set of RCA pin-type audio
cables.
Procedure
O Connect audio cables to the AUDIO MONITOR OUTPUT
terminals on television. Use the red cable to connect the right
(R) channel and the white cable to connect the left (L) channel.
O Connect the other ends efthese cables 1;othe AUX IN terminals
on the back of the audio system.
O
Turn off the television's speakers. To do this, press the AUDIO
button on the remote control until you see the "Speaker:"
display. Set the speakers to "Off' by pressing the AI)JUST
buttons. See "Adjusting the sound," page 63.
O Set the audio system's input to the A_k: position.
Audio System Rear Terminals
AUX
TV Rear Terminals
ANT- B
VHF/'J HF
[751_)
@;
White Lead--1
Red Lead --________=_
_[Z_[_
ACTIVE
_,_ NETW_K
tl
J_
|_ White Lead --_
Red Lead --_
You should make this connection in addition _o one of the other
connections in this chapter, not instead of other connections.
Basic Connections 37