Menus - Mitsubishi CS-31505 Owner's Manual

Using the remote control to operate cable boxes
and other brands of VCRs
operating Mitsubishi components
This TV's remote control has four "layers": the TV layer, the VCR-A
layer, the VCR-B layer, and the CABLE layer. Each layer can be
used to operate a different component in your A/V system. You
select the layer you want to use by pressing one of 7_he"select"
buttons across the top of the remote control. The TV layer is
programmed to operate your Mitsubishi TV, and the VCR-A and
VCR-B layers are programmed to operate Mitsubishi VCRs.
The following buttons are available
• power button
• pause button
• mute control
• SuperQuickView
TM
button
• QuickView
TM
button
• volume control
• input, button
• channel control
• enter button
• audio and video controls
When using this TV set.
• menu button
• cancel button
• display button
• home button
• off-timer button
• number buttons
• PIP controls
• PLAY button
• quick program button
operating cable boxes or other manufacturers' VCRs
If you have a cable box or a VCR from another manufacturer, you
can "set-up" the remote control to operate these components. The
VCR-A layer, VCR-B layer, and CABLE layer can each be set-up to
operate a VCR or a cable box.
setting up the remote control to ,operate you_ VCR
O Turn off your VCR.
O
O
O
O
Press one of the select buttons across the top of the remote to
choose the layer you want to set up: VCR-A, VCR-B or CABLE.
While holding in the POWER button on the remote control,
enter the code number listed in the chart on the following page
for your brand of VCR. Be sure to enter both digits of the code
number. If more than one number !is listed, try the first one.
Release the POWER button.
Press the POWER button again. Your VCR should turn on. If
the VCR turns on, your remote control is now set to operate
your VCR.
44 Chapter 3: Operating Your TV