Mitsubishi CS-31505 Owner's Manual page 20

i
L
k
4 •
J
@ audio and video controls
Use these buttons to select the audio and
video functions you want to adjust.
Repeatedly press the AUDIO button or
VIDEO button to select one of the
flmctions listed below.
• audio function button (AUDIO)
stereo!SAP/mono
- bass
- treble
- balance
- surround off/simulate/hall
speaker on/off
• video function button (VIDEO)
- tint
- color
- contrast
- brightness
- sharpness
- color temperature high/middle/low
- closed captioning
@ quick program button
(QUICK PROGRAM)
Use this button to easily program a
Mitsubishi VCR connected to your TV via
the Active A/V Network. When you press
this button, your TV will switch to Input-l,
your VCR will turn on, and the VCR's
";Program to record" menu will appear.
When you are finished programming your
. VCR, press this button again; your VCR
will turn off, and your TV will return to its
previous position.
]ifyou press this button while the TV is
locked, or while using the television's
menus, then the VCR wi]l turn on, but the
TV will not switch inputs.
Important:
To use this feature, you must have
connected a Mitsubishi VCR with Active
.._gVNetwork to your TV with an A/V
Network cable.
@ display button (DISPLAY)
Use to view an on-screen summary of the
current TV settings for TV or cable
functions, and the display related 1:o
Extended Data Services (XDS).
@ home button (HOME)
Press to return to regular TV viewing from
the on.-screen menus, to turn off the
on-screen displays, and _o cancel closed
captioning.
@ off-timer button (OFF-T)
Use to program the TV to turn off
automatically at a later time.
@ picture-in-picture controls
Use to control the special picture-in-picture
(PIP) t_nction.
• PIP button (PIP) -- Press to turn on
the reduced PIP image, to change its
size, or to cancel it. The button iis also
used with the Active AN Network
Feature Isee page 93).
• channel button (CHANNEL) -- Press
to change the channe:[ of the reduced PIP
image.
* source button (SOURCE) -- Press
repeatedly to change the source of the
reduced :PIPimage between the
antennas and the external inputs.
• pause button (PAUSE) -- Press to
freeze the reduced PIP image, to return
to a "live" image, and to use the:
Snap-shot and Replay functions.
• swap button (SWAP) -- Press to
"swap" the audio from the mail_Limage
with the audio from the PIP image.
• enter button (ENTER) -- Press to
exchange the so arces of the PIP image
and the :main image.
• adjust buttons (_L, Y,a, b ) -- Press to
move the PIP image on-screen.
@ number buttons (0-9)
Use to select a channel number and to
enter a parental lock code.
Overview of the Remote Control
19