Adjusting The Color Purity - Mitsubishi CS-35503 Owner's Manual

Adjusting the color purity
Your Mitsubishi color television has a large screen picture tube and
color purity may be affected slightly by the earth's magnetic field.
For best results, follow the instructions below to adjust the color
)urity.
Important:
control panel
O Turn off the TV set.
O Select the desired location and install the set. Determine the
compass direction where the set is facing. The direction is
determined from the front of the screen facing _rward.
Select the position for the DIREC, TION switch according to the
chart below.
TV STREN SWITCH
DIRECTION SWITCH
S NEUTRAL N
X
X
X
X
X
X
X
X
SET DIRECTION
North
North East
North West
South
South East
South West
East
West
O Turn the TV on and check the color performance.
If a color impurity is still present;, change the STRENGTH
switch to position 'T'. If a color impurity persists after changing
the STRENGTH switch position, press the degauss button after
a few minutes.
- The color purity switches must be adjusted each time the set is
moved to a new location.
- If a color impurity still persists after the re-adjustment of color
purity switches, contact your Mitsubishi dealer or Mitsubishi
Authorized Warranty Service Center.
Getting Started 47