Table of Contents
Advertisement
TV+home
theater
receiver
(AN
receiver)
Important:
equipment
you will need
To hook-up
a home theater
receiver,
you will need:
1 set of RCA pin-type
audio
cables,
2 RCA pin-type
video cables
(if connecting
a standard
VCR),
or
1 Super Video cable (S-VHS)
and 1 RCA pin-type
video cable
for a Super VHS home theater
receiver.
Procedure
0
Connect
one end of an RCA pin-type
video cable to the TV
VIDEO
INPUT
terminal
of'the home the,_ter receiver.
Connect
the other
end of this cable to the VIDE()
_?UNER OUTPUT
terminal
on the back of the television.
O
Connect
one end of an RCA pin-type
video cable to the VIDEO
OUTPUT
terminal
of the home theater
receiver.
Connect
the
other end of this cable to the EXT-1 VIDEO INPUT
terminal
on
the back of the television.
If you are connecting
a Super VHS(S-VHS)VCR,
connect
Super
Video cable to the S-VIDEO
OUTPUT
terminal
of the home t:heater
receiver.
Connect
the other end of this cable to the EXT-1 S-
VIDEO INPUT
terminal
on the back of the television.
Connect
a set of RCA pin-type
audio cables to the TV AUDIO
INPUT
terminal
of the home theater
receiver.
Use the red
cable to connect
the right (R) channel
and the white cable for
connecting
the left (L) channel.
0
Connect
the other ends of this cable to the left and right AUDIO
TUNER
OUTPUT
terminals
on the back of the television.
40
Chapter
2:
Connecting
Your TV
Advertisement
Table of Contents
