Mitsubishi CS-35503 Owner's Manual page 98

Troubleshooting (cont.)
Problems Possible Solutions
For More Information
The remote control doesn't
work.
• Check that the batteries are
installed correctly.
See "Getting ready to use
the remote control[" in
Chapter I for an explana-
tion of how to install batter-
ies it. the remote control.
Check the select button is
set to TV.
See "Remote control but-
tons and functions" in
Chapter 1, which explains
where the select button is
located.
Be sure that you are point-
ing the top of the remote
control toward the TV from
a distance of no more than
20 feet.
See "Getting ready to use
the r_mote control" in
Chapter 1, which contains
pointers for using the
remote control.
The TV takes several sec-
onds to respond to button
commands.
Use the ENTER button to
avoid delays.
See "Changing channels" in
Chapter 3, which explains
the function of the ENTER
buttc,n.
You can't access a channel.
• Be sure that the channel
you want to view is pro-
grammed into memory.
• Check that the TV is tuned
to the correct input source
(antenna) for that channel.
See "Memorizing channels"
in Chapter 3, which explains
how _:oprogram channels
into the TV's memory.
See "Selecting the input
source" in Chapter 3, which
explains how to change the
input source.
96 Chapter 5: Troubleshooting