Change.the.output.volume.level - Extron electronics MPX 423 A User Manual

Figure 5-18— RGB Delay drop-down box
2. Click the desired time (in seconds) for the output delay.
N If you choose an output number greater than 2, (i.e., outputs 3 or 4 for Video
signals and 5 or 6 for S-video signals) the RGB Delay options are no longer
accessible.
Change the output volume level
Users can set each output's volume level. The range is:
level 0 = minimum volume to
level 64 = maximum volume
N If you choose an output number greater than 2, (i.e., outputs 3 or 4 for Video
signals and 5 or 6 for S-video) the volume level options are no longer accessible.
N The default volume level for output 1 is at level 50. The default volume level for
output 2 is at level 64.
Change an output's audio level setting as follows:
1. Click on the output drop-down scroll box (figure 5-19).
2. Select the desired output (1 or 2).
Figure 5-19— Output selection drop-down box
3. Click on the Volume Steps (64 max) drop box (figure 5-20).
4. Select the desired output level (00 to 64)
Figure 5-20— Volume steps drop-down box
MPX 423 A • Ethernet Control 5-15