Configuration.tab; System.settings.page; Ip.settings.fields - Extron electronics MPX 423 A User Manual

Configuration tab
The Configuration tab includes pages that show the current System Settings,
Passwords, and Firmware Upgrade data for the MPX 423 A.
System Settings page
The Systems Settings page (figure 5-4) consists of fields where you can view and
edit IP administration and system settings. Date and time information can be easily
updated.
N Access to the MPX 423 A settings using the Ethernet port is not password
protected. Ensure only knowledgeable and qualified personnel access the
switcher using a Web browser.
Figure 5-4 — System Settings page
IP settings fields
The IP settings fields provide a location for viewing and editing settings unique
to the Ethernet interface. After editing any of the settings on this page, click the
Submit button. Explanations for some of these fields follows.
Unit Name
This name field can be changed to any valid name, up to 24 alphanumeric
characters.
N The following characters are invalid in the matrix name:
{space} ~ @ = ' [ ] { } < > ' " ; : | \ and ?.
DHCP
The Dynamic Host Configuration Protocol (DHCP) is an Internet protocol for
automating the configuration of computers that use TCP/IP. DHCP can be used to
automatically assign IP addresses, deliver TCP/IP stack configuration parameters
such as the subnet mask and default router, and provide other configuration
information such as the addresses for printer, time and news servers. For specific
settings information, see your system administrator.
MPX 423 A • Ethernet Control 5-5