Using The Controls - Maytag Neptune MDE7500 Use & Care Manual

: SING THE CONTROLS
s ............
If there are no words on the touchscreen, open the door, touch any pad (except off), or touch the screen to "wake" the controls.
Sensor Dry - automatically senses the moisture in the load and shuts the dryer offwhen the selected dryness level (very dry to damp
dry) is reached.This cycle is recommended for the majority of loads including delJcates, wrinkle free and cotton/sturdy items like towels,
bedding and jeans.
Step
Select "Sensor Dry". The next screen will be the Review
Screen. If the selections are correct, press Start/Pause. If
changes need to be made, follow the next steps.
Step
Select dryness level. The dryness level ranges
from very dry to damp dry. Select the level
appropriate for the load. The "Normal Dry"
level will be used for most loads.
very dry - used to completely dry sturdy or bulky items
including towels and jeans.
more dry - uses slightly less time to dry than very dry with
similar results. Hay find some blue jean seams slightly damp.
normal - used for drying the majority of loads.
less dry - still provides the benefit of the load being slightly
damp_ but items wi[[ dry faster once they are [aid fiat or hung
to dry.
damp dry - designed to partially dry items. Used for items
that lay flat or hang to dry.
regular - for sturdy cottons or those labeled "Tumble Dry."
medium - for permanent press, synthetics, lightweight cot-
tons or items labeled "Tumble Dry Nedium."
delicate - for heat sensitive items labeled "Tumble Dry
Low" or "Tumble DryWarm."
extra low - Provides the lowest heated dry temperature pos-
sible."Extra LowTemperature" is lower than "Delicate."
Step
Select appropriate temperature; "Regular",
Medium , Delicate or "Extra Low".
6