Pentax K-R Operating Manual page 51

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Specify the parameters for developing RAW images.
The following parameters can be changed.
Parameter I Value
12M (4288X2848)/10M (3936X2624)/
Recorded Pixels
6M_ (3072x2048)/2M (1728x 1152)
Quality Level -k-k-k (Best) / Yr-k (Better) / _ (Good)
Bright/Natural/Portrait/Landscape/Vibrant/
Custom Image Muted/Bleach Bypass/Reversal Film/
Monochrome
AWB (Auto)/;,b,', ' _(Daylight)/_ (Shade)/
d_ (CIoudy)/_D (Fluorescent Light Daylight
Color)/_N (Fluorescent Light Daylight
White Balance "1 White)/_W (Fluorescent Light Cool White)/
L (Fluorescent Light Warm White)/
_ (Tungsten Light)/_,WB (Flash)/CTE/
_:_ (Manual)
Sensitivity -2.0 to +2.0
High-ISO NR Auto/Off/Low/Medium/High p.100
Shadow Correction Off/Low/Medium/High p.208
Distortion Correction *2 Off/On p.211
Lat-Chromatic-Ab Adj *2 Off/On p.211
Color Space sRGB/AdobeRGB p.205
"1 This cannot be set for RAW files taken in Multi-exposure mode.
*2 This can be selected only when a compatible lens is attached. (p.211)
Page
p.192
p.193
p.213
p.200
iiiiiiiiiiiiiiiiiiiiiiiiiiiii_
1
Press the four-way controller
(A T) in Step 4 on p.259 to
choose the parameter you want
to change.