Pentax K-R Operating Manual page 34

#
0
7
Use the four-way controller (• • )
to select the number of recorded
pixels and press the OK button.
When the number of pixels is larger than 2M; the image is resized
2M
to 2M or less. (default setting)
0.3M When the number of pixels is larger than o,3M the image is resized
-- to 0.3M or less.
OFF The image is not resized.
Change the [Transmission Method] setting as necessary.
Standard (IrSimple) Bi-directionally exchanges information with the other
device. (default setting)
Transmits information in only one direction and does not accept
IrSS any answers or requests for resending from the other device.
Select this setting when specified by the other device.
Use the four-way controller (• •) to select [Send and
receive] and press the OK button.
The screen to select either to send or receive data appears.
Bring the infrared ports of your camera and the other
device close together.
Operate infrared transmission on the other device.
Transmission is possible is within a distance of 20 cm, at an emission
angle of up to 15 degrees from the center.
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiii
!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiiiiiiiiiiiiiiiii