Advertisement
Unit cannot becontrolled...
"CH" on the MAIN MENU cannotbe
selected...
Video cassette cannot be inserted...
Video cassette cannot be removed..,
Eject does not function or insertion
cannot be done...
Video cassette ejects when a
recording is started, or the power is
turned off for timer recording...
The disc cannot be removed...
In Stop mode,the VCR motor
(CYLINDER) continuesto rotate...
Aim Remote directly at the remote sensor on the unit. (P,66)
Avoid any object blocking signal path,
Inspect the remote bettedes. (P.6)
Make sure VCR LOCK is set to off. (P.33)
Exposing unit remota sensor to direct fluorescent
or outdoor light may cause
signal interference.
Press DVD<->TV for TV mode.
Insert the cassette window side up; record tab facing you.
Completely insert Power Plug into an AC outlet.
Turn the POWER offand then on, and tryejectingor insertingthe tape
again.
Make sure cassette recordtab is intact.(P.6)
First,turnthe unitpoweroff.Then, preparea dgidwire (e.g. an extended
paperclip, etc.) and,applyingmoderateforce, insertit straightintothe holeat
the base of the trey.The tray will ejecta little.Now, pullthe tray all the way out
and removethe disc.(P.65)
To enableQuick Play mechanism, the VCR cylinderwill rotatefor about 5
minutes.This reducesresponsetime fromStop to Play modeand from Play
to RewindSeamh mode.
If you cannot resolve the problem, please call the Customer Satisfaction Center for
product assistance at 201-348-9090.
To locate an authorized servlcenter, please call toll free 1-800-211-PANA
(7262).
Warning and Instruction Displays
NO CH FOUND PLEASE CHECK
ANTENNA CABLE CONNECTION
THEN
PUSH CH UP KEY AGAIN
PLEASE SET CLOCK BEFORE
PROGRAMMING
CHECK CASSETTE
RECORD TAB
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC
NO CASSETTE
PLEASEINSERT
A CASSETTE
PLEASE PREPARE FOR TIMER REC
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE
OR REFER TO MANUAL
END: PLAY KEY
VCR LOCK ACTIVATED
PLEASE CHECK THE TYPE OF DISCS,
AND STAIN OR SCRATCH
OF A DISC
IT IS PROHIBITED
TO COPY DVD/
VIDEO CD/CD TO VHS
These displayswill alertyouof a missed
operationor providefurtherinstructions.
If no active channels are found for CHANNEL MEMORY...
If you attempt to set or review a Timer Recording, VCR Plus+
System Programmingor set the On-TImor and the Clock is not set..,
If you press REC, and a cassette is inserted with no record tab...
If you press STOP dudng a Timer Recording,,.
If youpress pLAY, FF, REW, or REC withouta cassette
inserted...
If the unitis notinStopmodeor a cassette withrecord tab is not
inserted twominutes beforea TImer Recording is abouttobegin.;.
If head cleaning becomes necessary while playing back a
tape...
If you press a function button other than STOP/EJECT
or
POWER while the unit is in VCR Lock mode...
If you press PLAY, or the unit reads data from a stained or
scratched disc in DVD mode. Also, if the type of disc is other
than DVD, V'_eo CD or CD,,,
If you press REC in DVD mode.,,
m
9
12,13
6,17
21
t6,17
20,21
8
33
7
17
55
Advertisement
