Advertisement
Check the flowing points once again if you are having trouble with your unit,
No picture or sound...
Poor picture with normal sound...
Poorsound with normalpicture...
PoorTV reception...
No coloror poorcolor...
Ghost (multiple)images.,.
"IVprogramscannotbe watched...
Channelcannotbe selected...
TV programcannotbe recorded...
Timer recording.cannot b e
)erformed...
No playback picture, or the playback
)ictura is noisy or contains streaks...
VCR cannot be controlled...
Play fails to start even when PLAY
is pressed...
Play starts but then stops
immediately...
Picture is distorted during rapid
advance or rapid reverse...
No rapid advance (or rapid reverse)
play...
Play does not start even when title
is selected...
Audio seundtrack
and/or subtiffa
language is not the one selected at
the inifiat settings...
No subtitles...
Alternative audio soundtrack
(or subtitle) language cannot be
selected...
Angle cannot be changed...
54
Make sure your antenna system ('rv or CABLE), is correctly set. (P. 9)
Completely insert Power Plug into an AC outlet.
Set POWER button to ON.
Select "INT" on SP switch. (P.10)
Adjust BRIGHTNESS,
SHARPNESS,
and PICTURE controls in the SET UP
TV menu. (P.50)
Adjust VOLUME control. (P.14)
Adjust SHARPNESS
and PICTURE controls in the SET UP TV menu. (P.50)
Adjust TINT and COLOR controls in the SET UP TV menu. (P.50)
Install a directional antenna.
Make sure the selected channel is in unit's memory. (P.13)
• Only the channel
begin recorded can be viewed on this unit.
• Make sure your antenna system (TV or CABLE). is correctly set. (P. 9)
• Make sure cassette record tab is intact. (P. 6)
• Check that clock is set to current time and date.
• Make sure DSS/CABLE box (if used) is left on and tuned to channel to be
recorded.
• Set recording Start/Stop time correctly. (P.20-21)
• Timer recording may not be performed or continued if a power interruption of
more than 1 minute occurs before or dudng a Timer Recording, after power
is restored.
• AdjustTRACKING controlin either direction.(P.16)
• Try Head Cleaning. (P.8)
• Make sure VCR LOCK is cat to off. (P,33)
I.
This unit cannot play discs other than DVDs, Video CDs and CDs.
The disc may be dirty and require cleaning.
Be sure disc is installed with label side up.
The picture will be somewhat distorted at times: this is normal.
Some discsmay havesectionswhich prohibitrapidadvance (or rapid
reverse).
Confirmthe •DVD LOCK"setting.(P,4g)
If the audio ecundtrack
and/or subtitle language selected at DVDinitiel
settings does not exist on the disc, it will not be accessible.
Subtitles appear only when available on disc.
=OFF" is selected at the changing subtitle language. Select =ON" to display
the subtitles. (P.46)
Aifemative language cannot be selected with discs which do not contain
more than one language,
For some discs, alternative language cannot be selected with the AUDIO or
SUB TITLE button. Try selecting it from the DVD menu if available.
This function is dependent on software availability. Even if disc has multiple
angles, they may be recorded for specific scenes only (ANGLE indicator on
unit lights up). (P.47)
Advertisement
